vht series 105 c aluminum electrolytic 10 nte electronics, inc. voice (800) 631?1250 (973) 748?5089 fax (973) 748?6224 http://www.nteinc.com subminiature (radial lead, 105 c max) the nte vht series of aluminum electrolytic capacitors are designed for use in automotive, commercial, and in- dustrial applications. these high temperature, radial lead capacitors are especially suitable for applications that re- quire extended life and higher temperature operation. ratings capacitance range: 0.1 f to 4700 f tolerance: 20% voltage range: 16 to 250 volts performance specifications operating temperature range: ?40 c to +105 c (?40 f to +220.9 f) leakage current: 6.3v to 100v: 0.01cv (+3 a) 160v to 250v: 0.03cv (+15 a) capacitance tolerance: 20% (m) measured at +20 c (+68 f), 120h z high temperature load test: 1000 hrs @ +105 c (+220.9 f) and rated voltage ripple current: the ripple current multipliers (see table) adjust the current to make the capacitors operating tem- perature the same for different ambient tempera- tures and ripple frequencies. temperature 45 c 55 c 65 c 75 c 85 c 95 c 105 c multiplier 1.5 1.46 1.32 1.17 1.0 0.79 0.5 load life: 1000 hrs @ +105 c (+220.9 f), no voltage applied shelf life: 1000 hrs @ +105 c (+220.9 f), no voltage applied mechanical specifications lead solderability: meets the requirements of mil?std 202, method 208 marking: consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, vendor identification. recommended cleaning solvents: methanol, isopropanol ethanol, isobutanol, petro- leum ether, propanol and/or commercial deter- gents. halogenated hydrocarbon cleaning agents such as freon (mf, tf, or tc), trichloroe- thylene, trichloroethane, or methylchloride are not recommended as they may damage the ca- pacitor. case size and dimensions: d? ? = d ? + 0.5 max l? = l + 1.0 max at d ? 8.0 l? = l + 2.0 max at d ? 10.0 d ? d? ? insulating sleeve d ? l l? 5.0 min 18.0 min a 0.5 ordering information vht 10 m 25 series capacitance tolerance voltage
105 c aluminum electrolytic vht series 11 nte electronics, inc. voice (800) 631 ? 1250 (973) 748 ? 5089 fax (973) 748 ? 6224 http://www.nteinc.com vht series dimensions: diameter (d ?) x length (l): mm wv cap ( f) 16 25 35 50 63 160 250 0.1 5 x 11 0.22 5 x 11 0.33 5 x 11 0.47 5 x 11 5 x 11 1.0 5 x 11 5 x 11 6 x 11 6 x 11 2.2 5 x 11 5 x 11 6 x 11 8 x 11.5 3.3 5 x 11 5 x 11 8 x 11.5 10 x 12.5 4.7 5 x 11 5 x 11 5 x 11 5 x 11 8 x 11.5 10 x 12.5 10 5 x 11 5 x 11 5 x 11 5 x 11 6 x 11 10 x 12.5 10 x 20 22 5 x 11 5 x 11 6 x 11 6 x 11 8 x 11.5 10 x 20 13 x 25 33 5 x 11 6 x 11 6 x 11 8 x 11.5 8 x 11.5 13 x 21 13 x 25 47 6 x 11 6 x 11 8 x 11.5 8 x 11.5 10 x 12.5 13 x 25 16 x 25 100 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 16 x 25 18 x 36 220 10 x 12.5 10 x 16 10 x 20 13 x 20 13 x 20 330 10 x 16 10 x 20 13 x 20 13 x 20 13 x 25 470 10 x 20 13 x 20 13 x 25 16 x 25 16 x 25 1000 13 x 25 16 x 25 16 x 25 16 x 25 18 x 31.5 2200 16 x 25 16 x 31.5 18 x 31.5 3300 16 x 31.5 18 x 31.5 4700 18 x 31.5 * these dimensions are for reference only, please consult the factory for actual size. vht mechanical specs: dimensions (mm) outside diameter d ? 5.0 6.0 8.0 10.0 13.0 16.0 18.0 lead spacing a 2.0 2.5 3.5 5.0 7.5 lead wire d ? 0.5 0.6 0.65 0.8 * these dimensions are for reference only, please consult the factory for actual size.
|
